The Duplo V-767 Forms Burster bursts, trims, decollates, slits, and imprints continuous forms and suits any forms handling requirement while enhancing the final appearance.

Check signer/imprinter – imprints 3 ½” and 7” forms.  Removable signature saddles for complete security or change of signature plates.  A center slitter, decollator attachment, margin chopper and deep stacker all can be added. Optional interstacker provides slitting and sequential stacking of two-wide forms. 

Ideal for any office environment, the electronic length settings and fixed burst rollers make the V-767 compact and quiet, performing at variable speeds up to 393.4 feet per minute.

Standard Features:

• The electronic length settings and fixed burst rollers make the V767 compact and quiet.
• User-friendly control panel allows a quick and easy form length setup.  Also features power driven side guides for simple form width setup.
• Built-in LED indicators on both margin slitters show where sheets will be slit.
• Form width memory stores up to 10 jobs.  Pin tractors stop at each stored position to indicate form width previously used.
• Variable speed up to 393.4 feet per minute.
• Large graphic LCD control panel allows easy setup and job view by displaying from count, set lengths, and jams with instrucitons.
• DSC(Dynamic Stability Control) automatically reduces the speed to prevent burst errors.
• Jam detector automatically stops operation in order to protect forms from being damaged.
• Interlocking safety cover provides operator safety precautions.
• Last form sensor automitacally stops operation after last form is burst.
• Self diagnostic system for service assistance.

• Form Size:  Length: 3" to 12", Width: 5" to 18" (5" to 16.9" without margin slit)
• Trim Margin:  Up to 1.125"
• Single Ply Form Capacity:  12.35 to 41.7 lbs.
• Multiple Form Capacity:  8-part carbonless (max. 13.9 ls. x 8 sheets)
• Speed:  Up to 393.4 feet per minute
• Job Memory:  100 presets
• Power Requirements:  120V ± 10% 50/60 Hz         
• Margin Slitter Guide LED Battery:  Lithium battery (CR-2032) x 2 (recommended to be replaced every three years)
• Weight:  250 lbs.              

• Check Signer/Imprinter - in-line unit imprints 3 1/2" and 7" forms  Removable signature saddles for complete security or change of signature plates.
• Center Slitter (cannot be used with Decollator) - provides capability of slitting forms in half, necessary when running 2-up applications and slit merging.
• Decollator (cannot be used with Center Slitter) - decollates parts not to be burst and will refold forms underneath the burster.
• Margin Chopper - reduces waste volume by chopping up margin trims.  Ideal for high volume usage.