Products
|
ORDERING INFORMATION
1-800-449-2680
Local (770) 449-1103
Fax (770) 368-8879
3230-K Peachtree Corners Cir.
Norcross GA 30092
|
|
|
|
Home > Automatic Paper Cutters
Automatic Paper Cutters
|
Triumph 4350 Automatic Tabletop Cutter with Digital Display
SCS® (Safety Cutting System) package:
- Hinged, transparent electronically controlled front safety guard
- Trasparent safety cover on rear table
- Main switch and safety lock with key
- Electronically controlled, true two-hand operation
- 24 volt controls (low voltage)
- Patented IDEAL safety drive
- Automatic blade return from every position
- Disc brake for instant blade stop
- Blade and cutting stick can be changed without removing covers
- Blade changing device covers cutting edge of blade
- Blade depth adjustement from outside of machine
Features:
-
Electric blade and clamp drive
-
Solingen steel blade
-
Solid steel blade carrier and adjustable blade guides
-
Automatic clamp
-
Precision side guide
-
Spindle-guided back gauge with calibrated crank
-
Digital display for precise back gauge positioning
-
Bright, LED optical cutting line
-
All-metal construction
-
Optional stand or cabinet (shown)
-
UL and C UL approved
| Cutting width |
16 7/8" |
| Cutting height |
1 1/2" |
| Narrow cut |
1 3/8" |
| Cutting length behind blade |
15 5/16" |
| Table length in front of blade |
9" |
| Motor |
3/5 HP |
| Power |
115 V, 60 Hz |
| Dimensions (DxWxH) |
34 5/8" x 25 1/4" x 14 1/8" (41 1/2" H with stand, 41 1/2" H with stand) (42 1/2" with cabinet) |
| Shipping Weight |
200 lbs. (226 lbs. with stand, 295 lbs. with cabinet) |
|
|
Triumph 4850D Automatic Cutter with Digital Display
SCS® (Safety Cutting System) features:
-
Hinged, transparent electronically controlled front safety guard
-
Transparent safety cover on rear table
-
Main switch and safety lock with key
-
Electronically controlled, true two-hand operation
-
24 volt controls (low voltage)
-
Patented IDEAL safety drive
-
Automatic blade return from every position
-
Automatic clamp return from every position
-
Disc brake for instant blade stop
-
Blade and cutting stick can be changed without removing covers
-
Blade changing device covers cutting edge of blade
-
Blade depth adjustment from outside of machine
Features:
- Soligen steel blade
- Electric blade and clamp drive
- Solid steel blade carrier and adjustable blade guides
- Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
- Dual side guides on front and rear tables
- Spindle-guided back gauge with calibrated crank, narrow separations, and plastic gliders
- Digital display for precise back gauge positioning
- Bright, LED optical cutting line
- All-metal construction
- Stand with storage shelf
- UL and C UL approved
Specifications:
|
Cutting width
|
18 7/8"
|
|
Cutting height
|
3"
|
|
Cutting Narrow cut
|
1 1/4"
|
|
Cutting length behind blade
|
17 11/16"
|
|
Table length in front of blade
|
13 5/7"
|
| Motor |
1.5 HP |
| Power Supply |
115 V, 60 Hz |
|
Dimensions (DxWxH)
|
38 1/4" x 29 3/4" x 48 1/2"
|
|
Shipping Weight
|
556 lbs.
|
|
Triumph 4850EP Automatic Programmable Cutter
SCS® (Safety Cutting System) package:
- Hinged, transparent electronically controlled front safety guard
- Trasparent safety cover on rear table
- Main switch and safety lock with key
- Electronically controlled, true two-hand operation
- 24 volt controls (low voltage)
- Patented IDEAL safety drive
- Automatic blade return from every position
- Disc brake for instant blade stop
- Blade and cutting stick can be changed without removing covers
- Blade changing device covers cutting edge of blade
- Blade depth adjustement from outside of machine
Features:
- High storage capacity, programmable EP back guage control module with 10 button keypad and LED display stores 99 programs (up to 99 steps each) and frequently used measurements
- Up to 9 repeat cuts can be integrated into a program in a single step
- Digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inche)
- Control module features repeat cut and eject functions
- "Set" function key for reference measurement
- Self-diagnostic system with error indication on display
- Electric blade and back gauge drive
- Solingen steel blade
- Solid steel blade carrier and adjustable blade guides
- Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
- Dual side guides on front and rear tables
- Spindle-guided back gauge with narrow separations and plastic gliders
- Electronic hand wheel with variable speed control for manual back gauge setting
- Bright, LED optical cutting line
- All-metal construction
- Stand with storage shelf
- UL and C UL approved
Specifications:
| Cutting width |
18 7/8" |
| Cutting height |
3" |
| Narrow cut |
1 3/8" |
| Cutting length behind blade |
17 11/16" |
| Table length in front of blade |
13 5/8" |
| Motor |
2 hp |
| Power |
115 V, 60 Hz |
| Dimensions (DxWxH) |
38 1/4" x 29 3/4" x 48 1/2" |
| Shipping Weight |
556 lbs. |
|
Triumph 6550EP Automatic Programmable Cutter
SCS® (Safety Cutting System) package:
- Hinged, transparent electronically controlled front safety guard
- Trasparent safety cover on rear table
- Main switch and safety lock with key
- Electronically controlled, true two-hand operation
- 24 volt controls (low voltage)
- Patented IDEAL safety drive
- Automatic blade return from every position
- Disc brake for instant blade stop
- Blade and cutting stick can be changed without removing covers
- Blade changing device covers cutting edge of blade
- Blade depth adjustement from outside of machine
Features:
- 25 1/2" cutting width accomodates parent stock
- High storage capacity, programmable EP back guage control module with 10 button keypad and LED display stores 99 programs (up to 99 steps each) and frequently used measurements
- Up to 9 repeat cuts can be integrated into a program in a single step
- Digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inche)
- Control module features repeat cut and eject functions
- "Set" function key for reference measurement
- Self-diagnostic system with error indication on display
- Electric blade and back gauge drive
- Solingen steel blade
- Solid steel blade carrier and adjustable blade guides
- Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
- Dual side guides on front and rear tables
- Spindle-guided back gauge with narrow separations and plastic gliders
- Electronic hand wheel with variable speed control for manual back gauge setting
- Bright, LED optical cutting line
- All-metal construction
- Stand with storage shelf
- UL and C UL approved
Specifications:
| Cutting width |
18 7/8" |
| Cutting height |
3" |
| Narrow cut |
1 3/8" |
| Cutting length behind blade |
17 11/16" |
| Table length in front of blade |
13 5/8" |
| Motor |
2 hp |
| Power |
115 V, 60 Hz |
| Dimensions (DxWxH) |
49 3/4" x 39 1/4" x 48 1/4" |
| Shipping Weight |
801 lbs. |
|
PLEASE CALL FOR PRICING @ 1-800-449-2680! OR
CLICK HERE TO REQUEST PRICING OR INFORMATION!
|
|
| "Monthly Featured Specials"
Magner 110 Coin Counter & Sorter
|
Featured Product
|
|
|
.jpg)
